发布询价单
您的位置:首页 > 资讯 > 综合资讯 > 正文

智能-POD™坚固耐用,经济实惠的无人机系统(Smart-Pod™ Rugged, Affordable UAV System)

2015-12-11 21:21 性质:转载
免责声明:无人机网(www.youuav.com)尊重合法版权,反对侵权盗版。(凡是我网所转载之文章,文中所有文字内容和图片视频之知识产权均系原作者和机构所有。文章内容观点,与本网无关。如有需要删除,敬请来电商榷!)
About this project Smart-Pod™ is the core of a work-horse miniature Unmanned Aerial Vehicle (UAV) system. ...

About this project

Smart-Pod™ is the core of a work-horse miniature Unmanned Aerial Vehicle (UAV) system.  It elegantly combines a custom-fit mission pod (autopilot, avionics, instruments, cameras, etc.) with a ruggedized R/C aircraft making the UAV moreaffordableeasier to fly, safer to operate, and more practical to support.  Coupled with a formalized UAV Pilot Training Program it represents a 'smart' way to enter the UAV field. 

(note - the above video shows our North American Robotics' 'Prairie Hawk' Smart-Pod-enabled UAV on its 85th mission, all with no damage, regardless of landings on asphalt, dirt roads, tilled farm fields, harvested corn fields, and both short and long prairie grasses.  None posed any particular concern to the aircraft landing.) 

* If the idea of operating a UAV has appealed to you - then you will welcome our practical approach and unique products.

* If you have been concerned that learning to operate a UAV is difficult - know that we designed our UAVs specifically to be well-behaved enough for the novice, but capableenough for the advanced UAV operator.  We planned for someone who has never flown an R/C aircraft, nor gathered any aerial photography, as well as operators who need extensibility and flexibility.  We integrated compehensive Ground School with an accurate UAV flight simulator and series of real world training missions to introduce the pilot to the flight characteristics of our UAVs, and to develop their skills. This approach works.  If you're considering an entry in to UAVs - this will be and ideal start.  If you are already confident that you know what you need, this will perform dependably season after season. 

* If you have been worried about the dangers involved in UAVs - we make safety the watchword in operating a UAV/UAS.  Our Smart-Pod's "soft" materials and light weight minimize its potential to cause damage, and its special design makes pod-enabled UAVs much easier to fly and land safely than a typical R/C aircraft.

* If you have been discouraged by the start-up costs associated with the few non-toy UAVs that are available - you will see the wisdom we used to keep start-up, operating, and maintenace costs low and manageable. 

* If you want a Sci-Fi "drone" that flies itself and does all its own thinking - be prepared, you are pretty much what the FAA is working to prevent.   UAV operation needs to be done with forethought, and with consideration of both public safety and individual privacy.  Our line of UAVs is capable of nearly complete automated flight from launch to recovery, but the FAA discourages this.  Our strategy is to blend human pilotmanagement with the automated flight.  We designed our approach to provide pitch and roll stabilization at all times making human control of the UAV smooth and unintimidating, with instant access to pre-programmed flight patterns to make complex missions easy to execute.  Our system provides the UAV pilot with immediate over-ride at all times.  This promotes the safest and most responsible of UAV operations. 

What is a UAV/UAS? 

An Unmanned Aerial Vehicle (UAV) is an aircraft, often a fixed-wing airplane, which can operate under its own control or under the control of a remote human pilot.  A miniature UAV (MAV) is much smaller than a conventional airplane, and can be deployed close to where it is needed; often hand-launched and recovered.  It can bring aloft cameras and other specialized sensors to gather aerial imagery, special infrared (IR) imagery, or atmospheric weather data.  An Unmanned Aircraft System (UAS) includes the UAV and a Ground Control Station (GCS) of some form, along with a telemetry communication channel between the pilot, the UAV, and the GCS. 

 

Who needs miniature UAVs and why?

A birds-eye view has always been valuable for inspecting property, managing resources, advertising and sharing a large-scale events (like outdoor celebrations or sports), and supporting scientific studies of a large or inaccessible area.  Historically, this was accomplished by a hiring a private pilot and airplane, as well as a photographic crew, and securing a special permit to fly where the desired images could be gathered.  This has beenextremely expensive, and severely limited what applications could afford it. 

With a robust miniature UAV, a wide range of applications can be explored with comparatively affordable costs.  North American Robotics (NAR) has been developing UAVs with special cameras and sensors for scientific environmental research projects, precision agriculture and improved farm production, real estate property inspection, municipal site management, and emergency response search support.  Our goal is to make these rugged UAVs available as practical tools – the kind users can depend upon to perform, and afford to actually operate. 

A different approach than other miniature UAVs

Many reputable groups and organizations are working to provide UAVs to the industries wanting to experiment with them, but the products available represent either wildly expensive ultra-high-end defense department type UASs or park-flyer near-toys, leaving the practical, “work-horse” of UAVs only to the do-it-yourself-ers.  If UAVs, especially miniature UAVs, are to get into the hands of regular people interested in developing new applications and new industry, then a product line needs to be provided that is affordable, rugged, tailor-able, safe, and most importantly – supportable. 

To be rugged, a UAV needs to protect the autopilot avionics, instruments, and sensors - making certain they can operate effectively and that they are secure throughout the mission, from transport, to deployment and launch, through to landing and recovery. 

To be supportable the UAV needs to be serviceable and ready any time the weather permits safe operations".  This is very difficult if a UAV is so unique there is only one vendor to support it, and only one place from which to get spare and replacement parts.  That means stepping back away from designing yet another unique special-purpose limited-availability aircraft and inadvertently becoming the very bottle neck of parts and support that hold back application development

What has been missing is a capable and robust manner of bringing popular airframes and the autopilot electronics together to make a “pick-up truck” UAV, a FORD F-150* of the miniature UAV industry.  At North American Robotics we have done just that by following a proven approach that has been employed by the U.S. Air Force, NASA, and our own DOE R&D for decades - an air-borne mission pod

(*FORD F-150 is a registered trademark of FORD MOTOR COMPANY.  Its use here is intended as a compliment to their product line, but does not imply endorsement or support from FORD for this project)

In the mission pod approach, all of the costly and vulnerable avionics, sensors, flight control instrumentation, and telemetry electronics are carried in an aerodynamic, ruggedized, crash-survivable pod slung beneath the aircraft’s hull or fuselage.  Furthermore, the pod is designed to be the landing gear of the UAV.  The airframe is left virtually unchanged, while the mission pod mounting is designed to not interfere with the aircraft center of gravity (CG) or any other flying characteristics.  The demonstration aircraft chosen have been capable and popular R/C aircraft, with a wealth of replacement parts and options readily available.  The example instruments (cameras and sensors) include popular series sport cameras with optional mission-tailored lenses and weatherproof impact-resistant polycarbonate cases.   

We call our approach the "Smart-Pod" Modular UAV, because it is the "smarts" of the UAV.   It is also a smart approach to building a practical UAV. 

The early Smart-Pods looked like this - a solid block of high-impact EVA foam with cavities machined in to exactly fit the autopilot and other avionics that get housed inside.   

The Smart-Pod is attached to the strongest areas of the host aircraft to create the rugged UAV.   It is shaped to be aerodynamic, and to serve as an effective landing sled to protect the instruments and the aircraft. 

The final cost of our turn-key Smart-Pod UAV is a fraction of the $15K-$20K cost of comparable mini-UAVs on the commercial market today. 

We've already constructed six (6) prototypes of the full 2-meter wingspan Prairie Hawk andPrairie Hawk Pro Smart-Pod UAVs, using three (3) different commercial R/C electric powered gliders.  We flight tested them in over 100 sorties (launch/fly mission/recovery) and developed a method to strengthen and ruggedize individual components.  In our UAV prototypes the mission pod configuration both improved the flight stability of the aircraft as a sensing/camera platform, and dramatically increased the UAV's ability to land without injury in unimproved field conditions.  It made all the test aircraft significantly easier to fly in both autopilot and in manual modes. 

Smart-Pod simple integration to aircraftSmart-Pod simple integration to aircraft
Smart-Pod in operating positionSmart-Pod in operating position
 

Video of Smart-Pod UAV

We have made the Smart-Pod UAV part of a complete organization of service, training, and support for individuals and groups deploying and operating miniature UAVs for academic, agricultural, industrial, municipal, and commercial applications.  (See video above and more on YouTube.com.  http://youtu.be/lPNOSuqMYTQ

http://youtu.be/K6eAPm3VMxY

http://youtu.be/NEtDgU3K7-Q

http://youtu.be/QoDq8EnVIB4

http://youtu.be/GHg-cgXxI8c

http://youtu.be/1LPW7b9hTcg

)

Smart-Pod design approach

We have introduced miniature UAVs into our research involving atmospheric emissions monitoring, aerial pipeline inspection, and ground vegetation damage analysis.  For our applications we've operated from all types of terrain – plowed farm fields, unimproved roadways, military tank training grounds, rural prairies, and hard-packed deserts.  None of our field sites included a nicely mowed thick carpet of soft grass in a city park.  Because of this, we had two primary design criteria: 

·         the UAV needed to deliver the desired electronics and payload over the region of interest long enough to gather the data needed, and

·         the UAV needed to be easy to launch and rugged enough to land on any terrain, and also easy to repair if and when some damage occurred. 

“Safety” was a major concern, both to the aircraft instruments and to the people and property on the ground below where the UAV would be flown.  These practical criteria led us to the adoption of existing, popularExpanded Polyolefin (EPO) and Expanded Polypropylene (EPP) R/C airframes and the use of light and durable Ethylene-Vinyl Acetate (EVA) foam for the mission instrument pod.  These two materials were substantially unaffected by any weather conditions, retained their shape and strength throughout a wide range of ambient temperatures, remained easy to machine and work with, and would cause minimal damage during a crash. 

Each component of the commercial airframes was “ruggedized” to increase its strength and resistance to abrasion expected during belly landings at unimproved fields.  Each of these modifications allowed the component and the airframe to bear more load weight and flight stress and endure more punishment – all vital to a practical work-horse UAV.  It was nothowever “required” for UAV flight and operations under normal condition and the aircraft can be flown with virtually un-modified commercial parts to prevent being grounded during an important mission.  It simply performs better and safer with the ruggedized components. 

We selected a motor and ESC that had braking capability, coupled with a folding plastic propeller that would minimize any injury danger. 

We enveloped our Li-Po batteries with a light-weight fire retardant material to protect the airframe and the surrounding ground covering and property from fire in the [unlikely] event of a hard crash. 

Smart-Pod advantages

By separating the autopilot electronics and camera/sensor instruments from the hull/fuselage, and enclosing them in a container specifically designed to protect them, then the largest expense in fielding an UAV was also made the most safe and most durable. 

By making the pod easy to add to any suitable aircraft available the plane actually becomes expendable, and even in the event of a complete catastrophic crash, could be replaced with a trip to the local well-supplied hobby store putting the mission back on track in a matter of hours. 

The pod design itself can be tailored to fit and deploy a wide range of commercial cameras and experimental instruments – contact NAR and discuss this important advantage. 

Replacements for any vulnerable parts can be carried along, but are often repairable in the field with supplies available from local hardware stores. 

NAR supports and promotes the open-source ArduPilot Mega (APM) autopilot and Mission Planner Ground Control Station (GCS), which together allow visual graphical planning of complex flight missions directly on a photographic map.  NAR modifies both the autopilot to tailor it to the airframe, and the Mission Planner to make it easier to use. 

NAR Prairie Hawk and Prairie Hawk Pro turn-key UAVsNAR Prairie Hawk and Prairie Hawk Pro turn-key UAVs
NAR Ground Control Station - in Pelican case w DX7s TxNAR Ground Control Station - in Pelican case w DX7s Tx

The GCS with the Mission Planner allow the UAV Pilot to visually plan the AUTOmated segment of their flight.  This is done in a point-and-click fashion placing waypoints (WPs) on a satellite map displayed in the Mission Planner.  The mission is uploaded to the UAV and assigned to a programmable switch on the DX7s Transmitter.  During the flight, the Pilot only has to press the switch to initiate the automated mission.   Here is an example of a trivial training mission with 3 WPs and Return To Launch where the UAV circles until the Pilot takes control and lands. 

After the flight, the Mission Planner allows the Pilot to examine the Flight Data Log and chart the course as-flown in GoogleEarth. Here, the mission can be inspected to determine its accuracy and improve planning for future missions.

The U.S. Federal Aviation Administration (FAA) govern the U.S. air space.  They are still writing all the new policies concerning operation of UAVs in the U.S. air space.  An important aspect of their current regs is having two people, a pilot and co-pilot, both operating the UAV.  Our approach makes the most of this by allowing the two operators to work together.  The pilot is in control of the Transmitter and flies the UAV in traditional R/C fashion, triggering pre-programmed flight modes as needed.  The co-pilot operates the GCS, and via the telemetry, sees a virtual dashboard with flight instruments and can track the UAV real-time on the displayed map.  BOTH can control/over-ride the UAV with complementary controls.  It is a system that allows either one to operate, and for simpler missions the Pilot with Transmitter can operate the UAV alone. 

The launching and recovery of our UAVs has been made as easy and predictable as possible, and will allow the Pilot to focus on the purpose of their mission.

If the mission is simple aerial photography, it can be gathered using look-forward, look-sidesways, or look-down versions of the pod - whichever is needed for the mission.

Below is a satellite photo of our testing grounds - all other images were captured from our UAVs at different altitudes over this test ground.  The RED and YELLOW circles illustrate the precision we are capable of - maintaining and repeating a circular path many times for close area surveillance. 

上一页12

网友评论
文明上网,理性发言,拒绝广告

相关资讯

推荐图文

关注官方微信

手机扫码看新闻